There are basically three types of commercial roof types: Flat Roofs, Low-Sloped Roofs and Pitched Roofs. Flat roofs are the most common commercial roof, usually used for smaller structures and typically on the lowest end of the cost scale as they are the easiest and quickest type to build. Low-sloped roofs are typically used on large-scale buildings, are low cost and easy to install and repair. Pitched roofs have the best drainage and therefore are the least problematic but are the most expensive of these three. They are also the hardest and most expensive to repair.

Commercial Roof Materials

1. Thermoplastic Roofing- extremely flexible and resistant

2. EPDM Roofing- incredibly easy to install, maintain and repair

3. Photovoltaic Solar Panels- converts light energy to electrical energy but expensive to install and maintain

4. Green Roofs- usually flat roofs covered I vegetation which absorbs heat and protects underlying roof

5. PVC Roofs- incredibly fire-resistant and even more beneficial than EPDM roofing

Many construction sites still use paper timesheets to track employee hours but in a modern world, this task is slightly outdated, time-consuming, and leaves room for errors. There are many benefits of taking the plunge and converting to digital timesheets and we’ve listed the top 3 benefits below.

1. Convenience – digital timesheets are accessible anywhere at any time. One of the main issues with traditional timesheets is that they do not offer convenience, they are not accessible at any given time and often after a long working day, some employees may forget to fill them in.

2. Time-saving – paper timesheets are often time-consuming to fill in. a digital timesheet is far quicker to fill in and can be pre-set meaning for employees who work the same hours each week they are already filled in for them and would only need editing if hours change.

3. Accuracy – sometimes handwriting can be hard to read and mistakes can easily be written on paper timesheets. Digital timesheets leave room for far fewer errors meaning everyone is paid correctly and for the correct number of hours worked.

A jib or jib arm is that the horizontal or near-horizontal beam that’s incorporated into many crane designs to support the load beyond the most support. Usually, jib arms are attached to a vertical mast or tower or sometimes to an inclined boom, but one among if there’s one key takeaway, it’s that these proven, clever and efficient machines are mechanically sound. Finding a jib crane supplier is fairly easy too, and you only need to browse these robust machines online, whilst many local depots will have models on show.

How does it work?

Masts provide the vertical support structure; this permits for the boom to be held at the proper angle. With regards to booms and jibs, the horizontal member supports the moveable hoist; and this is often the part that’s fixed to the bottom or wall. Trolleys sit horizontally back and forth alongside the boom, helping to hold the hoist, while wire rope and lifting hook are also key features. Most jib cranes can be put into two main categories floor-mounted and wall-mounted cranes, with the floor-mounted cranes being attached to a tough and fast support base and wall-mounted cranes being attached to a structural support or wall. At times, jib cranes are permanently mounted into place, but small jib cranes are often mounted to vehicles, yet unfortunately these can only be used for lightweight tasks, so they’re not great in harsh settings or factory environments. Though it’s important to note that jib cranes are only assigned tasks that fall within their boom radius.

A few of the key advantages:

• Though they’re simple in design jib cranes are important pieces of kit simply because of their versatility and strength that they wield.

• As stated, jib cranes are very strong, even the smallest ones can hoist several tons. We would argue that the key to their strength is their fixed bases.

• They are reliable, because they have so few parts, meaning there is a reduced chance of a possible breakdown or failure points.

• They are easy to use because they eliminate multiple axes point movements that almost all crane operators must take care of; the rotational movement of the boom, the hoist lifting and lowering and thus the trolley travel.

• Jib cranes also have the advantage of transitional lifting, so they’re quick and nimble compared to other designs, which allows for them to manoeuvre heavy loads that are located during a rather small or cramped area.

Portable Jib Cranes

Like we stated before, portable jib cranes aren’t often used, but they’re still something we should always discuss because they do have their advantages. Some portable jib cranes are placed on a movable concrete block, or a metal heavy-duty block, this then means that they can be transported anywhere when needed, yet it increases the number it can lift when compared to ones that are mounted onto vehicles.

Though this mobility comes with a price, they’re unable to lift loads that exceed 500 kg, but it’s always best to check the specifications of each model for more details.

Advantages of portable Jib Cranes:

• They can prevent money, because you’ll easily move the jib crane around with a forklift, meaning you do not get to install multiple units

• Being that it’s portable you will have the jib crane complete almost any task in any position within your workshop.

• They are easy to operate; with its simple design jib cranes don’t require any special training and should be operated by almost anyone within the workshop.

There are many different types of forklifts out there, making the use of the correct one in your workplace is vital for effective working.
Reach Trucks- intended to reach shelves and spaces that other forklifts simply can’t. Their excellent reach makes them perfect for big warehouses, with some models can reach very high.
Rough Terrain Forklifts-are the perfect choice for outdoor work. With heavy-duty tyres and durable, rugged design; ready to work in an outdoor setting.
Telehandlers- are primarily an outside machine ideal for lifting heavy pallets or material to high work areas that standard forklifts aren’t able to access.
Sideloaders- Commonly found in industrial manufacturing facilities, side loaders load and unload objects on their side. This design lets them move along aisles and hallways without having to move around to unload—making them an excellent choice for long loads, like timber or steel.

Jib Cranes are widely used in the industrial sector, such as warehouses, factories and manufacturing plants. They provide a great deal of flexibility, versatility, efficiency and are extremely durable. 

They are very appealing during a production environment because they will increase worker productivity, reduce workplace injuries, and improve safety. If your staff are struggling to satisfy production quotas, or you’re missing that final piece to actually streamline your production process, a jib crane can help.

A jib crane may be a sort of overhead device that’s often utilised in a smaller work cell area for repetitive and unique lifting tasks. Jib cranes are incredibly versatile and may even be paired with overhead bridge cranes to maximise production.

The first and most frequent sort of jib crane may be a freestanding jib crane, and you can get one from a jib crane supplier. Freestanding jib cranes are used for multiple jobs like at marinas or machining in several industries. A freestanding jib crane can lift and move loads up to fifteen tonnes. A freestanding jib crane comes in three designs-base plates mounted jib crane, sleeve-insert mounted jib crane and foundation mounted jib crane. The pros of a freestanding jib crane are they’re very durable and may lift heavy loads. The cons of a freestanding jib crane are it’s expensive and once fixed it’s challenging to unfix it.

A foundationless jib crane is mounted on a slab and is usually used for indoor purposes. A foundationless jib crane doesn’t need any foundation and may be installed anywhere. The load lifting capacity of this jib crane maybe a thousand lbs. The pros of a foundationless jib crane are that it’s easy to put in and cost-effective. Another pro of this jib crane is it’s portable. The con of a foundationless jib crane is their load lifting capacity is far less than other jib cranes.

There are many sorts of jib cranes under the category of floor-mounted and everyone serves its own unique purpose. As an example, a freestanding (also referred to as a stand-alone) jib crane is foundation-mounted, which suggests that it is often installed almost anywhere—inside or outside. Freestanding systems offer higher capacities, longer spans, and 360-degree rotation to hide an outsized circular area within your facility. These systems are tough and heavy-duty compared to other floor-mounted types, but they’re also costlier and need a special foundation for correct mounting.

Mast-style jib cranes also are floor-mounted, which suggests they too provide 360-degree rotation and may be installed almost anywhere indoors. The main difference between a mast-style jib and a freestanding jib is that the mast-style is bolted to the ground and therefore the existing overhead support structure. This helps to eliminate the value of a special foundation, which is required for the freestanding system.