Skip to content

Construction News

The latest news coming out of the construction community

Home
Construction
Lifting Equipment
Constructiontest
Lifting GearLifting Gear Some sort of lifting is happening on every site. A lot of it is informal and under-considered, while the latter is planned and organized. The former depends on the person legally responsible knowing what the law demands from them and what the equipment they use is rated to do. LOLERC applies to any work equipment involving lifting, including lifting people. It states lifting equipment must be of sufficient strength and stability for the load, legibly marked to show the safe working load and be subjected to an inspection at appropriate intervals by a person who is an expert on the subject. This would require most lifting accessories for slings, chains, shackles, and hooks to be subjected to a detailed examination at an interval of no longer than 6 months. For equipment used for lifting of people, it is every 6 months, regardless of the risk assessed. PUWER Regulations, the Provision and Use of Work Equipment Regulations, also applies with LOLER, and details requirements on general maintenance, and records of inspection and training of the operators. While evaluating lifting gear, you may be surprised by all the possible equipment that falls under this category. There are several gear accessoriesu0026hellip;
Security Garage DoorsSecurity Garage Doors Deciding on your security garage doors on your commercial project is a balance between construction sequencing, planning, compliance, and insurance. If you opt for the wrong specification, you may pay for a higher rating that your insurer did not require, or your construction will be under protected. LPS 1175, the Loss Prevention Standard, is a good place to start for any commercial specification in the UK. The rating system that this standard employs for forced-entry resistance is from 1-8. A rating of 1 means there is a basic deterrent, while a rating of 8 implies that the barrier can withstand a sustained breach from intruders using power tools. The rating a project receives will often be determined by the building’s insurance classification or via the loss prevention adviser. The general starting points for construction projects, such as retail, industrial, or parking structures is generally Level 2 or Level 3. If a construction project will hold high-value or sensitive stock, that rating should be increased before the specification of the door. In the case of a residential construction, the situation will be different. The SBD (secure by design) is an initiative supported by the police that incorporates SBDu0026hellip;
Warehouse Storage & RackingThe selection of particular warehouse racking holds a strong influence on the construction of the building itself. Permanent decisions are made as uprights are bolted and flooring is drilled. Identifying the specification at the earliest possible moment is key. If not, they should at least have a working knowledge of the systemu0026#8217;s limitations. This should be before the project reaches its fit-out stages. Ultimately, it is the one decision that underscores the overall success of the building in relation to the client requirements. In the UK there are four basic system types. Within the sphere of UK industrial and commercial warehousing, selective racking constructions are the most commonplace. This is due to their configurability, palatability on multiple fronts, and diversity in storage. This type is ideal when there is a necessity for diversified storage and regular retrieval of individual pallets. With drive in and drive through racking, accessibility is sacrificed for space efficiency. Here, fork lift trucks are allowed to enter the racking to store high volume and limited product lines. To achieve maximum efficiency, narrow aisle racking requires specialized trucks to achieve high density storage in the same footprint. Cantilever racking is unique as it is different in designu0026hellip;
Oak Boards & FlooringSolid oak flooring can be discerning to specify. Boards of a single species can be immensely different in grade, character, and performance based on their drying, processing, and finish. These differences are especially important for contractors and clients of commercial or residential projects. First, grade needs to be decided. European oak traditionally can be ideal, select, nature, and rustic. Ideal oak has unblemished grain and uniform color. Rustic has differences in grain and color. There are no grading standards, and infringements can be confusing when price comparing. When looking for oak, it is prudent to request samples rather than rely solely on grading. Deciding on board width and thickness is important. Wider boards move more in response to humidity, so a more intensive preparation is crucial. Providing a solid oak board with adequate time to undergo conditioning is important and typically requires two to four weeks, but it is more important it matches the alignment of the board with room humidity and temperature. Boards lacking adequate conditioning can warp or splinter. Guarantees are voided when preparation is not done correctly. There are requirements for subfloors in solid oak installation. They must be level to within 3mm over 1.8 m, beu0026hellip;
Contact Us

Search

Category: Lifting Gear

16 Feb 2019

Top Types Of Lifting Equipment

Gone are the days when construction sites used to hire workers to spend time holding, lifting, carrying, pushing and pulling loads. Not only was it expensive but also posed a great danger to the workers health, leading to serious joint…
Read the full story →: Top Types Of Lifting Equipment

1 … 3 4 5

Construction News

Daily reporting on construction finance, development lending, bridge debt and capital markets. Editable footer copy — change this text in the Site Editor.

Sections

Lending
Development
Capital markets
Analysis

Contact

Contact the newsroom
Advertise
Privacy

© Construction Lending News. All rights reserved.